EZ-Adapter Ex MB931U-1VB R1 to stacja dokująca przeznaczona do współpracy z dyskami U.2 PCIe NVMe SSD klasy enterprise. Wykorzystanie złącza USB 3.2 Gen 2 pozwala na osiągnięcie transferów sięgających 10 Gb/s przy jednoczesnej kompatybilności ze standardem USB 2.0 oraz Thunderbolt. Przemyślana konstrukcja produktu umożliwia instalację nośnika bez użycia narzędzi, co pozwala na błyskawiczny dostęp do danych.
Access Your NVMe SSD with or without a drive tray
Nowa, przeprojektowana budowa EZ-Adapter Ex MB931U-1VB R1 pozbawiona została prowadnic dyskowych, dzięki czemu mieści tacki dyskowe używane w produktach HP, Dell, Supermicro i innych. Taka funkcjonalność umożliwia szybszy i łatwiejszy dostęp do danych bez konieczności ich demontażu z tacy.
Dyski U.2 NVMe SSD cechują się wysokim parametrem IOPS, dużą pojemnością, zwiększoną żywotnością oraz systemami zabezpieczeń takimi jak ETEP czy PLP - możliwość ich użytkowania uzależniona jest jednak od posiadania w komputerze odpowiedniego interfejsu. Odpowiedzią na jego brak może być EZ-Adapter Ex MB931U-1VB R1 - po prostu zadokuj dysk i wepnij kabel USB do komputera, aby uzyskać natychmiastowy dostęp do danych.
Profesjonaliści tworzący materiały video w rozdzielczości 12K przy użyciu kamery Blackmagic URSA Mini Pro 12K docenią możliwość szybkiego i łatwego dostępu do danych z dysku U.2 SSD
Najwyższa wydajność
Aby w pełni wykorzystać możliwości nośników U.2 PVIe NVMe SSD adapter EZ-Adapter Ex MB931U-1VB R1 wyposażony został w złącze USB 3.2 Gen 2 - umożliwia ono przesył danych z prędkościami do 10 Gb/s dając możliwość błyskawicznego kopiowania i przenoszenia dużych ilości danych. W zestawie znajduje się również zasilacz 12V, aby zapewnić wystarczający poziom zasilania pracującego nośnika U.2 SSD.
Otwarta kieszeń dyskowa umożliwia pasywne odprowadzanie nadmiaru ciepła.
Mały i przenośny
MB931U-1VB R1 został zaprojektowany z myślą o przenośności przy braku kompromisów na polu wydajności i trwałości. Obudowa wykonana z tworzywa ABS o zaokrąglonych krawędziach zabezpieczy pozostały sprzęt umieszczony w tej samej torbie. Niewielkie wymiary zewnętrzne produktu pozwalają na jego transport bez konieczności zajmowania dużej przestrzeni bagażowej.
Pełna kompatybilność
EZ-Adapter dostarczany jest z kablami USB C-C, USB C-Thunderbolt oraz USB C-A, dzięki czemu wspiera zarówno nowoczesne jak i starsze systemy. MB931U-1VB R1 jest zgodny ze standardem plug and play, jego użycie nie wymaga instalacji dodatkowych sterowników.
Wskaźnik stanu LED
MB931U-1VB R1 posiada wbudowany wskaźnik stanu w formie diody LED - informuje on o podłączeniu oraz aktywności nośnika. Przesuwny włącznik zasilania pozwala na wyłączenie nieużywanego dysku SSD.
Opcjonalny konwerter M.2 na U.2 SSD (EZConvert MB705M2P-B)
Użycie dodatkowego konwertera EZConvert MB705M2P-B pozwala na błyskawiczną zamianę dysku M.2 na U.2, dzięki czemu stanie się on kompatybilny ze stacją MB931U-1VB R1.
Kieszeń dokująca MB601M2K-1B M.2 mocowana w zatokę 3,5" oferuje prędkość przesyłu danych zgodną ze standardem PCIe 4.0. Połącz ją z adapterem MB931U-1VB R1 aby cieszyć się największą wydajnością.
Kluczowe cechy
*
Wsparcie dla jednego dysku U.2 PCIe NVMe SSD
*
Wytrzymałość złącza przekraczająca 10 000 cykli
*
Prędkość przesyłu danych do 10 Gb/s za pomocą złącza USB 3.2 Gen 2
*
Instalacja dysku bez użycia narzędzi oraz dodatkowych tacek
*
Kompatybilność ze złączami USB 2.0 oraz Thunderbolt
*
Niebieski wskaźnik stanu w formie diody LED
*
Duży przesuwny przełącznik zasilania
*
Zasilacz DC 12V w zestawie
*
Antypoślizgowe wypustki zabezpieczające produkt przed upadkiem
*
Kable USB C-C oraz C-A dla pełnej kompatybilności
*
3-letnia gwarancja producenta
*
Kompatybilność z dyskami M.2 NVMe PCIe SSD pod warunkiem zastosowania konwertera EZConvert MB705M2P-B
Model Number :
MB931U-1VB R1
Available Colors :
Black
Support Drive Size :
1 x 2.5" U.2 NVMe SSD (Up to 15mm height)
Host Interface :
USB-C 3.2 Gen 2 (Thunderbolt 4 compatible)
Power Input :
DC 12V/2A Power Adapter
Transfer Rate :
Up to 10Gb/s (Depending on hard drive speed)
Controller IC :
ASMedia - ASM2362
Structure / Material :
ABS plastic
Dimension (W x H x L) :
91.94 x 18.65 x 53.79mm
Product Net Weight :
46.3g
Package Gross Weight :
318.9g
Drive Activity LED Indication :
SSD power: solid blue; SSD access: flashing blue
Plug & Play :
Yes
Package contents :
Device, User Manual, DC Power Adapter, USB 3.2 Gen 2 Type C to A Cable & Type C to C Cable
Humidity :
5%~65% RH
Operating Temperature :
0°C to 60°C (32°F to 140°F)
Storage Temperature :
-35°C to 70°C (-31°F to 158°F)
Compliance :
CE, RoHS, REACH
Warranty :
3 years
Documents
Frequent Asked Questions
Q: I installed the and the device is connected to my computer, but the drive is not detected.
A: There are some scenarios you can do to rule out potential problems.
Scenario 1 – Drive status LED is not lighting up
Make sure the power switch turns on, the connected USB port works properly and the SSD, port, cables and power cord are plugged in and secured. If the LED lights up, but the drive is still not detected by the system, please continue to refer to Scenario 2; if the LED is off, please contact our customer service tech@icydock.com.
Note: Please be sure to use the USB cable that comes with ICY DOCK. If you have the same specification cable, you can replace it to see if the problem is solved.
Scenario 2 - The drive status LED lights up, but the SSD is still not detectable
Please confirm the drive and the connected USB port is in working condition and transfers data normally. Make sure you use the cable that comes with MB931U-1VB. If the problem persists, please go to Scenario 3.
Note: If the situation permits, we strongly recommend get your USB drivers updated, connect the device to different USB ports on the system, or replace the USB cable with the same specification to see if the connection problem is solved.
Scenario 3 - The SSD and the connected USB port do work normally, but the drive does not show up on my computer after connecting to my computer
It may be because the new SSD has not been formatted yet, or other drives have used the selected drive letter. Please go to Windows disk management to check whether the partition of the installed drive's partition is listed (refer to the tutorial for more info). After SSD formatting or changing the code, you should able to see the drive.
Note: If you have another SSD with the same specifications on hand, we suggest replacing the current drive with it and see if the problem is solved.
Please contact tech@icydock.com if the problem persists so we can resolve the issue as soon as possible.
Q: Is there any known compatibility issue between EZ-Adapter Ex MB931U-1VB R1 and U.2 NVMe SSDs?
A:The EZ-Adapter Ex MB931U-1VB R1 uses an ASMeida ASM2362 chipset and is designed to be compatible with most of the U.2 NVMe SSD available on the market. See below for the latest known issues reported by the users and a list of compatible SSDs.
Note: the SSD issues listed below have only been reported by a few customers. It is still too early to say they are not compatible as the issues may be caused by SSD firmware and host configurations. We are verifying the compatibility with ASMedia and will constantly update the compatibility list. Meanwhile, we suggest using SSDs that are known to be worked with EZ-Adapter Ex MB931U-1VB R1.
Click here report a compatible/incompatible U.2 NVMe SSD. Your help is greatly appreciated!
U.2 NVMe SSDs known to have an issue with MB931U-1VB R1
ASMedia has released firmware to fix issues of detecting 2TB or above U.2 SSDs. If you encounter any problems while installing the drive, please contact tech@icydock.com for further assistance.