•Supports 1x 3.5" SAS/SATA HDD (SAS host is required for SAS HDD)
•Installed into any standard external 5.25" drive bay
•Tray-less design for hot-swapping bare drives without tools or screws
•Heavy-duty all-metal door latch for best drive protection
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS only)
•Supports SATA data and power cables with locking latches

tray-less_enclosures

•Accommodates 1x 3.5" SATA HDD and 2x SATA HDD/SSD (up to 9.5mm drive height)
•Installs into any standard external 5.25" device bay
•Retractable dust cover for 3.5" slot to reduce the dust buildups in the system
•Supports SATA 6Gbp/s transfer speed
•Tool-less, screw-less, and door-less drive installation
•A single 15-pin SATA power connector powers all drives

•Fits 3 x 3.5-inch SAS/SATA HDDs into 2 x 5.25-inch external ODD/device bays
•Supports full SATA III (6 Gb/s) transfer speeds
•Supports SAS single-channel operation (SAS host required)
•Compact and space saving design to fit multiple drives
•100% tool-less and screw-less drive installation
•Large 80mm cooling fan with easy access fan speed control wheel

tray-less_enclosures

•Compatible with any standard 5.25" external bay
•Fits 1x 3.5" SATA HDD and 1x 2.5" SATA HDD/SSD (up to 9.5mm height while 3.5" drive is in use)
•Dual-purpose drive guiding mechanism & stabilizer
•Retractable dust cover to protect the internal connectors from dust buildups
•Tray-less, screw-less, door-less drive installation
•Both bays are powered by a single 15-pin SATA power connector

tray-less_enclosures

• Kompatybilny z dowolną standardową wnęką 5,25”
• Mieści 1x dysk twardy 3,5” SATA i 1x napęd optyczny 9,5 mm
• Dwufunkcyjny mechanizm prowadzący i stabilizator
• Beztackowy, bezśrubowy i beznarzędziowy montaż dysku 3,5”
• Sprężynowa osłona przeciwkurzowa do wnęki 3,5”, osłona przeciwpyłowa do wnęki ODD
• Oba pola zasilane są przez 15-pinowe złącze SATA

•Converts 2.5” SATA HDD or SSD to 3.5” SATA hard drive form factor
•Supports 2.5” SAS HDD w/ single channel SAS functions (requires SAS host)
•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with
•Fully SATA 3.0 Revision (6Gb/s) compatible and Backward compatible with SATA 2.0 Revision (3Gb/s) and 1.0 Revision (1.5Gb/s) drives
•Supports SATA 6 Gbps or SAS 12Gbps (single channel)
•Heavy duty stain-less steel exterior helps heat dissipation

hdd_ssd_adapters

•Featuring EZ-Fit design for anti-shock and the best drive fit
•Open air design with all around airflow vents for maximum air flow
•Completely tool-less drive installation for quick & easy setup
•Converts your 2.5” SATA HDD or SSD into an exact 3.5” SATA hard drive form factor
•Supports 2.5” SAS HDD/SSD with single channel SAS functions (requires SAS host)
•Supports SATA 6Gbps or SAS single channel

hdd_ssd_adapters

* Ulepszony mechanizm wstawiania napędu zapewnia solidne dopasowanie i zabezpiecza położenie dysku twardego na miejscu
* Wzmocnione zatrzaski drzwi mechanizmu blokującego
* Mieści 5 x 3,5 "SATA III HDD w 3 x 5,25" zatokach
* Kompaktowy i oszczędzający przestrzeń design dostosowany do wielu dysków
* Zaprojektowany dla obudów klienckich, jak i entuzjastów typu gaming / media center i serwerowych
* Konstrukcja Tray-less, bezśrubkowa i beznarzędziowa dla plug & play oraz intensywnego użycia

•Connects up to one 2.5” & 3.5” SATA HDD in a single external 5.25” bay for a space saving setup
•Supports a single 2.5” HDD/SSD from 9.5mm to 12.5mm height. (Up to 9.5mm while the 3.5” bay is in use)
•Fast and simple tool-less drive installation
•Able to run 2.5" & 3.5" SATA hard drive or SSD Simultaneously
•Individual SATA 6Gbps connection for each hard drive or SSD
•2 part anti-dust cover protects system internals even when a small 2.5” SATA drive is used

tray-less_enclosures