•Accommodates 4x 2.5" SAS/SATA SSD/HDD (5-9.5mm), with improved support for 7mm drives through a specialized stabilizing mechanism.
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS, SAS host required)
•Fits any standard external 5.25" optical drive bay
•Tray-less and door-less architecture enables tool-free hot-swapping of bare drives
•Individual drive power button and a newly optimized drive ejection mechanism for reliable operation.
•High-performance 40mm cooling fan with adjustable speed control and on/off jumper for thermal management

metal_tray_enclosures,nvme_enclosures,tool-less_tray_enclosures,tool-less_tray_enclosures

•Supports 4x 2.5" SAS/SATA HDDs/SSDs (up to 9.5mm drive height)
•Install into any standard external 5.25" drive bay
•Supports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required)
•Tray-less and door-less design for hot-swapping bare drives without tools or screws
•Reduce cable clutter by using a single 15-pin SATA power connection to power four drives
•Soft blue drive activity LED for each drive (Solid blue for power and flashing blue for drive activity)

•Supports 1x 2.5" U.2 NVMe PCIe 3.0/4.0 SSD (up to 15mm drive height)
•Uses 1x Slimline SAS (SFF-8654) connector, pin-out defined by SFF-9402 Rev 1.1
•Fits in 1x external 3.5" drive bay
•Compliant with PCIe 3.0/4.0 up to 64Gbps transfer speeds
•Heavy-Duty full-metal chassis with industrial-grade ABS plastic
•Door-less and tray-less design for a quick bare drive swap

nvme_enclosures

•Obsługa czterech dysków 2,5" SAS/SATA HDD/SSD (5-9,5 mm)
•Obsługa złącza SATA 3.0 6 Gb/s lub SAS 3.0 12 Gb/s (wymagany kontroler SAS)
•Instalacja w pojedynczej wnęce 5,25"
•Konstrukcja bez drzwiczek i tacek ułatwia zarządzanie dyskami
•Ulepszony przełącznik zasilania i system odinstalowywania dysków
•Wydajny wentylator 40 mm sterowany przełącznikiem

•Accommodates 1x 3.5" SATA HDD and 2x SATA HDD/SSD (up to 9.5mm drive height)
•Installs into any standard external 5.25" device bay
•Retractable dust cover for 3.5" slot to reduce the dust buildups in the system
•Supports SATA 6Gbp/s transfer speed
•Tool-less, screw-less, and door-less drive installation
•A single 15-pin SATA power connector powers all drives

•Convert your M.2 SATA SSD to a 2.5" SSD form factor, 9.5mm in height
•Exact same dimensions, port locations, and screw locations as a 2.5" SSD (9.5mm height)
•Accepts any M.2 SATA SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
•Enables hot-swap functionality for any M.2 SATA SSD
•Supports full SATA III bandwidth specification of 6Gbps
•100% tool-less and screw-less M.2 drive installation

hdd_ssd_adapters

•Compatible with any standard 5.25" external bay
•Fits 1x 3.5" SATA HDD and 1x 2.5" SATA HDD/SSD (up to 9.5mm height while 3.5" drive is in use)
•Dual-purpose drive guiding mechanism & stabilizer
•Retractable dust cover to protect the internal connectors from dust buildups
•Tray-less, screw-less, door-less drive installation
•Both bays are powered by a single 15-pin SATA power connector

tray-less_enclosures

•Supports docking up to 2 x 2.5 inch SAS / SATA HDD / SSD with hot-swap function (5mm – 9.5mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel)
•Fits any external 3.5” drive bay or floppy bay
•Full metal chassis with partial ABS-plastic for full protection
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures

•Supports docking 1 x 2.5” SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm – 15mm)
•Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single channel) •Fits any external 3.5” bay
•Full metal chassis with industrial ABS plastic for full protection to the drive
•Completely tray-less design and accepts bare drives without trays or holders
•Drive door-less design for quick hot-swapping

tray-less_enclosures