| Optional Certifications Available for ToughArmor EX MB491SKL-B | |
| TAA | Trade Agreements Act Compliance |
| UL | Safety Standard Certification |
| UL94 | Flammability of Plastic Materials |
| FCC | Federal Communications Commission Compliance |
| Wide Temperature | MIL-STD-810H - Method 501.7 & 502.7 |
| Vibration Test | MIL-STD-810H, Method 514.8, Procedure I (Resistance to vibrations) |
| Functional Shock | MIL-STD-810H, Method 516.8- Procedure I (Protection against shocks) |
| *IEC 60529 (IPX5) | Protection against water jets |
| • |
Konstrukcja przeznaczona dla SFF, małe komputery przemysłowe, systemy nadzoru, systemy automatyki, systemy lotnicze i mobilne systemy DVR
|
| • | Certyfikat MIL-STD-810G |
| • |
Podwójne zamki – metalowy zamek na klucz (dla ochrony) i zamek śrubowy (dla zapobiegania uszkodzeniom)
|
| • |
Wyjmowana tacka napędu umożliwia łatwą konserwację dzięki wsparciu SATA hot-swap
|
| • |
Unikalne ID dla dysków (#1 - #8)
|
| • |
FMieści 1x 2,5” HDD/SSD SATA o wysokości 5-15 mm w jednej 3,5” zatoce
|
| • |
Obsługuje HDD/SSD SATA/SAS w prędkości 6 Gbps i jest wstecznie kompatybilna z dyskami i hostami SATA 3 Gbps
|
| • |
Obsługuje SATA 6Gbps lub SAS 3.0 12Gbps (Single Channel)
|
| • |
Całkowicie metalowa konstrukcja idealna do zastosowań korporacyjnych
|
| • |
Technologia Multi-Flow zapewnia doskonałe chłodzenie pasywne
|
| • |
Anti-Vibration Technology tworzy bezpieczne środowisko dla dysków HDD/SSD
|
| • |
Active Power Technology indywidualnie doprowadza zasilanie tylko wtedy, gdy dysk jest umieszczony wewnątrz
|
| • |
Uziemienie EMI chroni przed szkodami elektrycznymi
|
| • |
Przeciwpyłowa klapka zapobiega przedostawaniu się kurzu, gdy urządzenie nie jest używane
|
| • |
Klips dla złącza SATA – zarówno 7- jak i 15-pinowego
|
| • |
Zgodność z MIL-STD-810H metoda 516.8 (wstrząsy) i 514.8 (wibracje)
|
| Model Number： | MB491SKL-B |
| Color： | Black |
| Support Drive Size： | 2.5" SSD / HDD |
| Compatible Drive Type： | SATA / single channel SAS (SAS host required) |
| Number of Drives： | 1 |
| Max Drive Height： | 15mm |
| Drive Bay： | 1 x 3.5" drive bay |
| Host Interface： | 1 x SATA 7pin (support SAS single channel) |
| Power Input： | 1 x SATA 15pin power |
| Transfer Rate： | SATA 3.0 up to 6Gbps / SAS 3.0 up to 12Gbps |
| Support HDD Capacity： | No limitation |
| Drive Cooling： | Metal heat dispersion |
| Structure / Material： | Full metal |
| Support Hot-Swap： | Yes |
| Drive Security： | Thumb screw lock & 2-segment keylock |
| Product Dimension (L x W x H)： | 138 x 101.2 x 25.4mm |
| Product Net Weight： | 389g |
| Package Gross Weight： | 442g |
| Drive Activity LED Indication： | Drive power: solid green; HDD access: flashing amber |
| Package Contents： | 1 - device, 1 - user manual, 8 - screw, 2 - key，1 - drive ID plug |
| SATA Connector Insertion Rate： | 10,000 |
| Humidity： | 5%~65% RH |
| Operating Temperature： | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature： | -35°C to 70°C (-31°F to 158°F) |
| Compliance： | CE, RoHS, REACH , MIL-STD-810H |
| Warranty： | 5 years limited warranty |
Compatible Drive Tray (Caddy):
Related Products Series:
Quick Link:
Q: Does MB491SKL-B support the new SATA 3.3 / SAS 3.0 Power Disable feature (PWDIS)?
A: The MB491SKL-B does not support the SATA 3.3 / SAS 3.0 PWDIS feature. If you install the SATA/SAS HDD/SSD with PWDIS in MB491SKL-B , the drive will not spin, and the system won't detect the drive. See the list below for known SATA/SAS HDD/SSD with the PWDIS feature.
While we recommend to avoid using the SATA/SAS HDD/SSD with PWDIS, you can use the methods below to disable the PWDIS feature physically if you already purchased the drive:
Method 1 – Using the Molex to SATA adapter or cable to disconnect the power to Pin 3 of the SATA power connector.
 |
 |
|
| Molex to SATA Adapter | Molex to SATA Cable |
Method 2 – Placing Kapton tape on Pin 1-3 of the SATA/SAS power connector to isolate the 3.3V power, as shown below.
 |
 |
Please contact tech@icydock.com if the problem persists.
Q: I feel that the drive tray's upper and lower metal spring is stuck when inserting the drive tray. What should I do?
A: Remove the drive tray from the enclosure and reinsert the tray without putting excessive pressure on the metal mesh sheet in front of the tray. Excessive force on the front metal mesh sheet may bend the top and bottom metal spring, causing difficulties when inserting the drive tray. Therefore, please do not forcingly insert the drive tray when this happens as it may cause damage to the metal spring.
 |
| Please DO NOT put excessive pressure on the metal mesh sheet as shown |
3.5” Mobile Racks for 2.5" SATA/SAS SSD/HDD
With ICY DOCK’s 3.5” drive bay enclosure series, we can maximize the unused 3.5" drive bay of any workstation with an easily removable drive enclosure in the frontal bay. We believe this is critical for most industries that are transitioning to be more efficient, frequently require more drive swap than others, and the ability to transport data from one system to another when drives are in the frontal bay as opposed to being stored internally.
